Nowadays, more and more people take their mobile devices to environments with the presence of water, such as beaches or swimming pools. Faced with this new scenario, smartphone manufacturers have intensified efforts to provide their equipment with greater protection against humidity and accidental contact with the environment. water.
But how do you know if your cell phone is really waterproof? Understanding these aspects can help you avoid costly damage and enjoy your phone more safely.
The main indicator of water resistance in modern mobile devices is the IP certification (Ingress Protection). This system classifies the level of protection of a mobile phone against the entry of dust and liquids. It is made up of two figures: the first corresponds to solids and the second to water.
For example, equipment with IP67 certification or higher is designed to withstand rapid immersion in water up to one meter deep (typically for 30 minutes), and IP68 can withstand slightly greater depths, up to 1.5 meters. You can check the specific classification of your model on the manufacturer’s website or in its user manual.
Despite certification, no protection is absolute. He salt waterpool chlorine or hot liquids can damage internal components, even in phones with high resistance. Salt can become embedded inside after drying and chlorine can corrode sensitive parts of the equipment, so it is best to avoid unnecessary exposure and look for protective covers suitable for the bathroom and beach.
If your cell phone is waterproof, there are a series of practical measures to maximize its durability:
- Avoid exposing it to strong jets or high-pressure situations, such as in the shower.
- Make sure to close the covers and ports tightly before getting the device wet.
- Do not immerse it in salt water and, in case of contact, rinse it with fresh water as soon as possible.
- Dry the equipment completely before connecting it to a charger.
- Avoid subjecting it to sudden changes in temperature and Do not expose it to environments with high humiditylike the bathroom while you shower.
Remember that even if your equipment is IP certified, manufacturer warranties generally do not cover water damage. Ensure prevention and protect your device from any humid environment to avoid mishaps and keep your smartphone in optimal condition for as long as possible.
If you cellular falls into water and does not have an IP rating that guarantees protection against liquids, it is important to act immediately to minimize damage. First, turn off the device and do not try to turn it on or charge it, as electricity can cause short circuits while moisture is present inside.
Remove the SIM card, microSD and any case or accessory to ventilate it better. Dry the exterior with an absorbent cloth, paying attention to ports and slots. Do not use hair dryers or apply direct heat, as excess heat can damage sensitive components.
Please place the phone in a dry and ventilated place. Traditionally it has been suggested to immerse it in rice, although there are specific desiccant bags and gels that are more efficient in absorbing moisture.
Leave it for at least 24 to 48 hours without trying to turn it on. After this period, check carefully before using it again. If the phone does not respond correctly, go to a specialized technical service. Acting quickly and avoiding connecting the device to power are key measures to increase the chances of recovery if your cell phone has been wet and lacks IP protection.
